RinseKit PRO Immersion Heater

Regular price$194.95
/
Shipping calculated at checkout.
SELECT VEHICLE*
  • In stock, ready to ship
  • Inventory on the way
  • Compatible with the RinseKit PRO & PRO PAK
  • 1 Year Limited Warranty
  • Free shipping
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
RinseKit PRO Immersion Heater
The Immersion Heater is our electric water heater compatible with the RinseKit PRO and PRO PAK portable showers. The stainless steel rod screws into your PRO or PRO PAK, and is powered by either a 12 volt power cord or trailer hitch power cord. It can heat the water in your RinseKit up to 110°F! It boasts an LED top display panel to display any warning signs, as well as a safety shut off function so that it doesn’t overheat. When combined with the PRO or PRO PAK, the Immersion heater allows you to take a hot shower anywhere, without the use of propane or any other fuels.

Heating on the Go- Heats the water in RinseKit PRO or PRO PAK up to 110 degrees by connecting to 12 Volt power cord or Trailer Hitch power cord
LED Top Display Panel- Color coded indicator lights reflect the heater's system and warning signs
Stainless Steel Rod- Corrosion resistant probe screws into the drain port of the RinseKit and does not need to be removed
Safety Shut Off- The heater will automatically turn off when water reaches 110 degrees F
8 Foot Long Cord- Makes it easy to store almost anywhere while connected to power

• The 12v plug heats the water in your RinseKit approximately 13°F every hour, and the trailer hitch plug heats approximately 24°F every hour
• Do not connect the heater's 12v plug to the RinseKit PRO or PRO PAK's 12v socket. The battery in the PRO and PRO PAK is not large enough to sustain power to the heater
• The heater will heat as long as it is connected to a power source. Unplug the 12v or trailer hitch power cord from your vehicle when your engine is off. Your battery will drain if the plug stays connected
• Avoid closing your truck's tailgate on the power cord or submerging the power cords in water

The Immersion Heater comes with two cords, a 12v and a trailer hitch:  
• The 12v pulls 120 WATTS and 10 AMPS 
• The Trailer Hitch pulls 266 WATTS and 20 AMPS

have hot water, anywhere

Whether you're looking for a hot shower to remind you of home, or want to clean up after supper, having access to hot water will help you sanitize, even in the middle of nowhere.

how to use

w/ the 12v and Trailer Hitch plug

STEP 1 & 2

Unscrew the cap of your RinseKit PRO or PRO PAK and make sure your unit is filled at least halfway with water.Tip: Fill your unit with warm water to help speed up the heating process.

Insert the heater into the opening, and begin tightening down the threaded sleeve carefully.

STEP 3 & 4

For the 12v Plug: Connect the 12v plug into the heater and your vehicle. Your car MUST be running to avoid draining the battery.

For the Trailer Hitch Plug: Connect the trailer hitch plug into the heater and your vehicle. Your truck MUST be on and your running lights activated to avoid draining the battery.

Note: The 12v plug will gradually heat the water in the PRO and PRO PAK by about 13°F every hour. The trailer hitch plug will heat by about 24°F an hour.

Once water has reached the max temperature of 110° F, the system light will turn GREEN. Now you're ready to enjoy hot water!

from our customers

what you want to know

The Immersion Heater comes with 2 cords, one 12v and one trailer hitch plug. The 12v plug (cigarette plug) will work with all vehicles, however, the trailer hitch plug will not. One version is compatible with 2015 or newer Ford vehicles and one is NOT, due to the internal wiring of older Ford vehicles. Please read thoroughly and ensure you are purchasing the correct version that will work with your vehicle.