Pressure Booster Pump
Pressure Booster Pump
Pressurize your RinseKit when you don't have a hose bib or sink
Pressure Booster Pump
Fits in the Plus or Pod models
Pressure Booster Pump
Pressure Booster Pump
Pressure Booster Pump
Pressure Booster Pump
Pressure Booster Pump
Pressurize your RinseKit when you don't have a hose bib or sink
Pressure Booster Pump
Fits in the Plus or Pod models
Pressure Booster Pump
Pressure Booster Pump
Pressure Booster Pump

Pressure Booster Pump

$39.95 Sale Save
The Pressure Booster Pump allows you to repressurize your RinseKit Plus or Pod on the go - simply by screwing it into your RinseKit accessory port and pumping it. The pressure gauge on top helps you make sure that you’re not over pressurizing, by showing you the PSI inside the tank.

NOT COMPATIBLE WITH THE ORIGINAL BLACK OR WHITE RINSEKIT

• Screws into one of the accessory ports on your RinseKit and can remain there

Built in pressure gauge - For safe handling (Note: Will only read PSI inside tank when pump is in motion, not when it sits idle in the tank)

The Pressure Booster Pump is ONLY compatible with the Plus + Pump, Pod, and Lux models. It is NOT compatible with the PRO, Original black or white RinseKit

How Does the Pressure Booster Pump Work?

...

No spigot? No problem.

Install the pump by removing the drain plug from your RinseKit by turning it in a counterclockwise direction. Fill the unit with water and make sure to leave about an inch of air space inside the tank. You can stick your finger in the drain port to measure the water, it doesn't need to be exact. Place the Pump into the drain port and hand tighten it by turning it in a clockwise direction. Once the pump is firmly secure, you are ready to use your RinseKit. 

...

How do I fill my RinseKit using the Pressure Booster Pump?

If you don't have access to a hose bib or sink and want to pressurized your RinseKit remotely, follow these directions:

1. Unscrew the drain plug from your RinseKit and pour water into the tank.
2. When the RinseKit is 95% full, install the Pressure Booster Pump by placing it in the drain port and turning it in a clockwise direction.
3. When the pump is securely installed, use your hand to pump pressure into the unit. Make sure to look at the pressure gauge located on the top of the pump to ensure that you are pressurizing your RinseKit to the recommended 65 PSI.

Do I need the pump in order to use my RinseKit?

If you have access to a hose bib or have access to a sink and own our Hot Water Sink Adapter accessory, you do not need the pump to pressurize your RinseKit.


The Pressure Booster Pump allows you to pressurize your RinseKit when you do not have access to a hose bib or sink. It is also great for adding additional pressure to your RinseKit if you have low water pressure or want to get the maximum spray time from your unit. Users who add additional pressure into their RinseKit after normal filling, get approximately 25% more spray time! 

Why does the needle in the gauge not move/read?

The pump will only read the PSI inside tank when the pump is in motion, not when it only sits in the tank. 

.