The RinseKit PRO + HyperHeater 2.0 Bundle combines powerful, portable cleaning with instant hot water for the ultimate outdoor shower solution. The 3.5-gallon RinseKit PRO, crafted from durable, UV-resistant materials, delivers a consistent 50 PSI battery-powered spray for up to 7.5 minutes at the push of a button. Paired with the propane powered HyperHeater 2.0, this bundle heats water up to 120°F in just 30 seconds with full temperature control. Built to handle the elements, the PRO + HyperHeater 2.0 is ideal for campers, surfers, and adventurers who want the convenience of a high-pressure, hot shower anywhere off-grid.
PRO:
Battery Powered Pressurization - Have access to pressurized water at the push of a button! No hose adapters or hand pumps required (AGM 12v 5Ah battery)
•3.5 Gallon Capacity - For longer showers and spray times (up to 6:30 continuously on Center)
•Superior Pressurization - Continuous spray at 50 PSI
•Easily Fillable - Top-fill cap allows for filling from literally any water source
•5 Setting Spray Nozzle - Settings include jet, mist, center, flat, and shower
•On-The-Go Power - 12-volt battery plug allows for charging of external devices anywhere
•Holds a Wide Range of Water Temperatures - 33°F - 110°F
HyperHeater 2.0:
⚠ Note: This is a tankless propane water heater that requires the power of a RinseKit PRO, Cube or Rack Shower to work. It is not a stand alone product.
• Hot Water Instantly - Connects quickly and easily to any battery powered RinseKit and will begin to heat the water in as little as 30 seconds.
• Temperature Control - Get full control of the water temperature with a heating dial and temperature gauge so you can take a shower that feels just right.
• Propane Operated - The heater relies on propane gas to heat the water. Propane must be purchased separately.
• Max Flow Showerhead - Bring the sensation of your home shower, wherever the road takes you. Suction cup mount included.
• Convenient Storage Bag - Quickly and easily pack up your heater, gas and power cables.
Cube:
Capacity: 3.5 gallons
Dimensions: 17"L x 11.5"W x 14"H
Weight: 13 lbs empty | 42 lbs full
External Bucket Materials: 100% recyclable, UV protected High-Density Polyethylene (HDPE) and Polypropylene (PP) plastic
Internal Battery Type: AGM 12v 5Ah battery
HyperHeater 2.0:
Shower head nozzle is included.
Dimensions: 10"L x 12"W x 12"H
Weight: 20lbs (without propane)
Materials: Stainless Steel
Compatible Gas Type: HD5 "Consumer Grade"
• Do not leave the heater attached to your RinseKit, even when powered off, the heater will drain the RinseKit's battery.
• Always use the propane heater outdoors, in a well-ventilated area
• The HyperHeater 2.0 is only compatible with the included shower head nozzle. The blue RinseKit nozzle will damage the system flow and this is not covered under warranty.
• Propane is NOT INCLUDED and MUST be purchased separately.
• Water heats up to 160°F.
Please see instruction booklet for a full list of important safety guidelines
Hot, high pressure showers anywhere
Heats water (up to 120°F) in less than 30 seconds, with 50PSI of consistent pressure.
Quick Setup
Three simple connections so that you can spend less time setting up and more time enjoying your hot shower.
high pressure
Powered by the PRO's 12v pump, the HyperHeater 2.0 delivers the highest-pressure of any portable hot shower.
MOUNT ANYWHERE
With it's flat shape, light weight and mounting plate, the HyperHeater 2.0 can be mounted on any vertical surface for maximum convenience.
PRO FAQ
We do not sell on Amazon. Any RinseKit product listing being sold on Amazon.com are unauthorized sellers and we are not associated with them. We cannot and will not be able to warranty any RinseKit products being sold on Amazon as we cannot monitor the condition unauthorized sellers offer our products in.
The PRO holds 3.5 gallons of water while the Cube has a slightly larger capacity at 4 gallons. The PRO tank is encompassed by a hard exterior HDPE bucket, while the Cube itself is the water tank. Additionally, the control panels differ per model. The PRO has a 12v charger and voltage meter while the Cube has a 12v charger, dual USB ports, water temperature gauge and battery life indicator.
Every PRO comes with an instruction booklet, 2 charging cables, one car and one wall charger. If either cable becomes lost, replacements can be purchased here.
HyperHeater FAQ
The HyperHeater 2.0 offers the convenience of a hot shower easily by using gas to heat the water from any battery powered RinseKit model, in as little as 30 seconds.
Note: This is a stand alone product, you must have a RinseKit PRO, Cube or Rack Shower in order to operate. Additionally, propane is NOT included and must be purchased separately.
The HyperHeater 2.0 is a tankless water heater powered by propane gas. Once connected to your RinseKit PRO, Cube or Rack Shower, water transfers to the HyperHeater 2.0 and is instantly heated and dispensed through the included shower head nozzle.