Frequently Asked Questions

Phone Support

Call Us

800-613-5764

General

The revolutionary RinseKit is a portable pressurized shower/clean up system that’s like having a hose to go! Fill it with hot or cold water and take it with you on your next grand adventure, stay clean and sanitized on the job or rinse off your kids to keep them from being constantly sticky!

Want to compare the Plus, Pod and PRO? Click here to check out our comparison chart!

One gallon of water weights approximately 8.33 lbs. Check out how much each unit weighs when they are completely full of water.

RinseKit Pod: 19 lbs

RinseKit Plus: 24 lbs

RinseKit PRO: 40 lbs

Yes you can! Our BPA free RinseKit can be filled up with portable drinking water for pets and people. It can also be filled with other liquids like soap or cleaning solutions. If you choose to fill your RinseKit with a liquid other than water, we do not recommend drinking from the RinseKit later. If you use your RinseKit as a cleaning budding or sanitation device and want to fill it with a cleaning solution, please follow the guidelines from the CDC before you do so. For directions on bleach use, please visit: https://www.cdc.gov/healthywater/emergency/cleaning-sanitizing/household-cleaning-sanitizing.html  

Yes! Every spray nozzle includes a small metal notch behind the shower head that can be used as a sort of kickstand to keep the nozzle spraying so you can use your RinseKit with both hands free. 

To troubleshoot your RinseKit PLUS, please click here. 

To troubleshoot your RinseKit POD, please click here. 

To troubleshoot your RinseKit SPORT, please click here

Company Information

We're based in Vista, California. The company was started by Chris Crawford, a surfer that felt there was a better way to clean up after surf sessions (read more about the company here!). He's a classic American entrepreneur and very involved in all aspects of the company. We just have to figure out how to turn him off at night… 

You can contact us at 800-613-5764 or email us at info@rinsekit.com. We are happy to answer any questions you have, teach you how to get the best use out of our products, and troubleshoot any problems you may have. You can also connect with us on Facebook (@RinseKit) and Instagram (@RinseKitUSA) - we would LOVE to hear from you! 

If for any reason you are not completely satisfied with your purchase, you may return your item(s) if they are in original condition and packaging within 30 days of receipt. A return must be approved by our team. For more information, please read our Return Policy here

Warranty

Yes. RinseKit is synonymous with quality. Every part is designed, selected, and analyzed after rigorous testing. After it's built, we take it to the road to make sure it can handle real-world abuse-and it does! Our return rate is less than 3%. With that in mind, we offer our customers a Limited Lifetime Warranty that extends for the lifetime of the product. For more information, please read our Warranty Policy here.  

While filing a warranty claim, you may notice we ask a lot of questions, that’s because we document every claim for future reference. All submitted warranties are used to help us understand the workmanship of our products and allow us to provide our manufacturers more insight on things we may not see in our warehouse inspections.   

We understand that a receipt can't always be kept, however warranties are time sensitive, as they depend on the date and store you purchased your RinseKit. An order number or screenshot of a receipt will be enough to act as proof of purchase.  

RinseKit will warranty units purchased through RinseKit.com and authorized RinseKit resellers. We cannot monitor the condition of RinseKit products being sold by unauthorized sellers. Therefore, we require proof of purchase to verify the origin of purchase. 

3.5 Gallon RinseKit PRO Portable Shower

The one-of-a-kind PRO is the newest addition to the RinseKit family. The 3.5-gallon, battery operated PRO is the portable pressurized water system that you have been asking us for. Perfect for your next weekend adventure getaway, washing up on the road or cleaning up your tools after a long day’s work! Check it out in action! 

Want to compare the PRO and Plus models? Click here to check out our comparison chart!

The PRO holds 3.5 gallons of water while the Plus holds 2 gallons of water. The RinseKit PRO is battery operated, you can fill it with non-pressurized water, turn it on and go! The 2-gallon RinseKit Plus relies on pressure from a hose spigot to operate instead of batteries and offers three ways to fill.  

No. The Hot Rod Water Heater is only compatible with the Plus and Pod models

For hot water on the go, fill your PRO with warm or hot water from your bath tub or sink (up to 120 degrees Fahrenheit) The PRO will keep the water a comfortable shower temperature for hours! (A heater accessory for the PRO is coming in 2022!)

Your charger will stay in the charging ports "Lock Points" snugly to hold the charger in place, so it does not slip out. With a firm pull, the charger will release. Do not tug on the charging cable cord itself.

The PRO's center spray setting will give you approximately 6:00 minutes of continuous spray time at 50 PSI. The shower setting sprays for approximately 3:30 minutes. The other three spray settings should give you the following spray times:

Mist: approximately 25:00 minutes. 

Jet: approximately 5:00 minutes. 

Flat: approximately 4:45 minutes. 

The Auto Nozzle System offers one setting and the flow of the spray is comparable to that of a standard kitchen faucet. 

It’s simple. Just open the Water Tank Cap and pour clean water in.  

The PRO holds approximately 3.5 gallons of water. When completely full, the PRO will weigh about 30lbs! Note: You can partially fill the PRO to reduce its weight.

Normal battery range for the PRO is 13v to 11v indicated by the voltmeter. 10.8v or lower means you need to charge the battery and voltage below 10.5 v can cause damage to the battery. 

The PRO comes with two charging cables: one for the wall and one for the car. The wall charger will light up RED when charging and flash RED and GREEN when fully charged. 

The car charger will light up RED when charging and will continue to light up RED as long as it is connected to your car. Note: The car charger will only charge to 12v.

When charging, make sure that the two charging tabs align with the "lock point" arrows on the charging port.

Note: The PRO will still charge, even if in use. Periodically charge the battery to keep voltage above 10.8v.

The PRO is compatible with our Spray Nozzle and new Auto Nozzle System. It is NOT compatible with any of the Plus + Pump and Pod accessories. See our compatibility chart for more information.  

Your PRO should arrive to you fully charged and ready to use right out of the box. Depending on your use, you should get 3-6 month’s use with one full battery charge. Need to recharge? It’s easy, plug in the wall or car charger and the PRO should be fully charged in approximately 4 hours. Note: The wall charger will light up RED when charging and flash RED and GREEN when fully charged.

We recommend bringing the PRO indoors when possible. You can leave the PRO outside as long as the temperature is above 32 degrees Fahrenheit. Freezing the PRO can cause damage to the internal water pump.  

Yes. The PRO is covered under a free 6-month warranty that includes any technical malfunction. NOTE: Any dismantling of the unit will void your warranty.

Also, an additional 6-month extended warranty can be purchased (within the first 14 days of purchase of the PRO). To learn more about our warranties, click here.    

Touchless Auto Nozzle System for PRO

The Auto Nozzle is the new hands-free device that pairs perfectly with the PRO. No need to worry about cross-contamination, stay clean and sanitized with the wave of a hand.  

The Auto Nozzle has a motion sensor located on the front of the device. To trigger the sensor, wave your hands within 4 inches of the nozzle and water will dispense. Make sure that the RinseKit logo is always positioned at the top of the nozzle, as the sensor and USB charging port are not waterproof. Check it out in action! 

The Auto Nozzle is only compatible with the RinseKit PRO. 

It will not work with our Plus with Pressure Booster Pump, Pod, Lux and Original Black RinseKit models.  

The Auto Nozzle’s lithium battery will last approximately 6 months per full charge depending on frequency of use. Each unit comes with a USB charging cable that can easily be plugged into any USB charging port.  

Yes. The Auto Nozzle is water resistant, but it is not completely waterproof. You should not submerge the Auto Nozzle and try to keep it dry. Make sure that the RinseKit logo is always positioned at the top of the nozzle, as the sensor and USB charging port are not waterproof.  

The Auto Nozzle has one setting, the flow of the spray is comparable to that of a standard kitchen faucet. When the PRO is full, the Auto Nozzle will spray for approximately 4 minutes.

It’s simple! To turn on the Auto Nozzle, first turn the PRO on and then make sure the on/off valve is in the ON position. To turn off the Auto Nozzle, just turn the PRO off and make sure the on/off valve is in the OFF position.  

The Auto Nozzle will not continue to leak as long as the PRO is powered off and the on/off valve is in the OFF position.   

Yes, the Auto Nozzle is covered under a free 1 year warranty that includes any technical malfunction. To learn more about our warranties, click here.   

2 Gallon RinseKit Plus Portable Shower + Pressure Booster Pump

The revolutionary Plus is the only portable shower to have the pressure of a garden hose without pumping or batteries. Holds approximately 2 gallons of hot or cold water, sprays up to 5-minutes and is full of features like a removeable lid for standing and internal storage space. Check it out in action! 

Want to compare the Classic and PRO Series? Click here to check out our comparison chart! 

The RinseKit's patented design transfers the water pressure from your home to the pressure chamber tank when you fill it from a hose bib or sink (with Hot Water Sink Adapter accessory). Check it out!

*If you are filling remotely and have to pour water into the RinseKit versus connecting it to a water source, you can use the Pressure Booster Pump that comes with your Plus to add in pressure by hand.

There are three ways to fill your RinseKit.

1. Using a Hose Bib: The RinseKit hos e quickly attaches to your water spigot with a quick connect coupler and fills the eon™ pressure chamber with approximately 65 PSI of water pressure. All you need is your RinseKit and a hose bib! Directions for filling this way can be found inside the box and on the tray of the RinseKit Plus.

2. Using your sink and our Hot Water Sink Adapter accessory: Simply unscrew the threading of your standard home sink, attach the Hot Water Sink Adapter accessory, and connect your RinseKit via the quick connect piece and you can fill your RinseKit with hot or cold water!

3. Remotely using still water and our Pressure Booster Pump accessory: Just unscrew the drain plug and pour water into the tank. When the tank is 95% full, install our Pressure Booster Pump accessory into one of the drain plug ports by turning it clockwise until it is snug. Once installed, you can hand pump pressure into the unit using the built in pressure gauge to add the optimum amount of pressure to your unit (65 PSI). The pump can remain in the RinseKit and does not need to be removed after each use. 

The Plus sprays for approximately 5:00 minutes on Center, 1:30 minutes on Shower, 2:30 minutes on Jet, and 10:00 minutes on Mist. Spray times may vary depending on the pressure of the unit. For best use, make sure your water pressure is 65 PSI

We recommend filling your RinseKit with 65 PSI for optimum use. Do not fill your RinseKit with water pressure higher than 75 PSI, as the tank is not meant to withstand such high pressures. The standard water pressure for most homes is 65 PSI.

If you are unsure of your home's water pressure, you can either call your water provider and ask for a reading, or you can purchase your own pressure gauge at a local hardware store and test it yourself. 

If your homes water pressure exceeds 75 PSI, you can purchase a pressure regulator so your tank does not fill with more than 60 PSI. A pressure regulator can be found in any hardware store! 

The Plus holds approximately 2 gallons of hot or cold water. 

The Plus holds 2 gallons of water while the Pod holds 1.5 gallons of water. The Pressure Booster Pump is included and installed in each Plus unit. Moreover, the Plus allows you to use both the Hot Rod Water Heater (heater sold separately) and pump accessories at the same time, while the Pod only allows you to use one accessory at a time.

The Plus comes with a durable outer case that is sturdy enough to withstand the weight of a person or piece of gear as it's being cleaned. It also has internal storage space for personal items, a removeable lid for standing while you shower, and tie downs so you can keep it secure in your car. The Pod has a more compact shape which makes it easier to fit into small spaces or vehicles.  

No batteries. No moving parts. No nuclear reactors. 

The Plus features two drain plug ports that double as accessory ports making it compatible with both the Hot Rod Water Heater and Pressure Booster Pump accessories. Both the pump and the heater can be installed in the Plus, used at the same time, and do not need to be removed after each use. 

Yes, the Plus can be filled with hot water from your sink (using our Hot Water Sink Adapter accessory), or filled with water and heated using our Hot Rod Water Heater. The Plus is insulated, so it can keep warm for hours. For best use and the warmest shower, we recommend filling your Plus with hot water from your sink and then continuing to heat it as you drive to your next adventure using our Hot Rod Water Heater.  

The RinseKit is made from 100% recyclable PP and HDPE plastic and is BPA free! 

Yes! Every spray nozzle includes a small metal notch behind the shower head that can be used as a sort of kickstand to keep the nozzle spraying so you can use your RinseKit with both hands free. 

1.5 Gallon RinseKit Pod Portable Shower

The Pod features a durable, hard shell built for your outdoor adventures. The compact size makes it portable and quickly stores behind your car seat. Unlike other portable showers, RinseKit is self-pressurized without pumping or batteries required. The BPA-free, insulated tank is easily filled with hot or cold water from a hose spigot or sink. Check it out in action!  

Want to compare the Classic and PRO Series? Click here to check out our comparison chart! 

The RinseKit's patented design transfers the water pressure from your home to the pressure chamber tank when you fill it from a hose bib or sink (with Hot Water Sink Adapter accessory). Check it out!

There are three ways to fill your RinseKit.

1. Using a Hose Bib: The RinseKit hos e quickly attaches to your water spigot with a quick connect coupler and fills the eon™ pressure chamber with approximately 65 PSI of water pressure. All you need is your RinseKit and a hose bib! Directions for filling this way can be found inside the box and on the tray of the RinseKit Plus.

2. Using your sink and our Hot Water Sink Adapter accessory: Simply unscrew the threading of your standard home sink, attach the Hot Water Sink Adapter accessory, and connect your RinseKit via the quick connect piece and you can fill your RinseKit with hot or cold water!

3. Remotely using still water and our Pressure Booster Pump accessory: Just unscrew the drain plug and pour water into the tank. When the tank is 95% full, install our Pressure Booster Pump accessory into one of the drain plug ports by turning it clockwise until it is snug. Once installed, you can hand pump pressure into the unit using the built in pressure gauge to add the optimum amount of pressure to your unit (65 PSI). The pump can remain in the RinseKit and does not need to be removed after each use. 

We recommend filling your RinseKit with 65 PSI for optimum use. Do not fill your RinseKit with water pressure higher than 75 PSI, as the tank is not meant to withstand such high pressures. The standard water pressure for most homes is 65 PSI.

If you are unsure of your home's water pressure, you can either call your water provider and ask for a reading, or you can purchase your own pressure gauge at a local hardware store and test it yourself. 

If your homes water pressure exceeds 75 PSI, you can purchase a pressure regulator so your tank does not fill with more than 60 PSI. A pressure regulator can be found in any hardware store! 

The RinseKit Pod sprays for approximately 3:30 minutes on Center, 1:00 minute on Shower, 2:00 minutes on Jet, and 8:00 minutes on Mist. Spray times may vary depending on the pressure of the unit. For best use, make sure your water pressure is 65 PSI. 

The Pod holds approximately 1.5 gallons of hot or cold water. 

All of our units come with a Spray Nozzle! Additionally, our Hot Water Sink Adapter accessory is included with every Pod unit. Now you can fill your RinseKit up with hot or cold water from you sink! A Hose Bib Adaptor is also include d with all our units! 

Pods ordered from RinseKit.com and Amazon.com will come with a Hot Water Sink Adapter. Those purchased at Sam's Club do not have one included. You can purchase one here. To have hot water on the go, you can also check out our Hot Rod Water Heater here!

No batteries. No moving parts. No nuclear reactors. 

The Pod holds 1.5 gallons of water while the Plus holds 2 gallons. The Pod features a sleeker and more lightweight design to increase its portability. It has a wrap around hose, easy grip handle, and one drain plug accessory port. The Pod can only use one accessory at a time, where the Plus can use two at a time. 

Yes, the Pod can be filled with hot water from your sink (using our Hot Water Sink Adapter accessory), or filled with water and heated using our Hot Rod Water Heater. For best use and the warmest shower, we recommend filling your Pod with hot water from your sink and then continuing to heat it as you drive to your next adventure using our Hot Rod Water Heater.  

The RinseKit is made from 100% recyclable PP and HDPE plastic and is BPA free! 

Yes! Every spray nozzle includes a small metal notch behind the shower head that can be used as a sort of kickstand to keep the nozzle spraying so you can use your RinseKit with both hands free. 

32 oz RinseKit Sport Misting & Spray Water Bottle

Get ready for the Sport! Everything you love about insulated water bottles with a RinseKit twist! The Sport’s unique design has both a spray and mist function perfect for a drink, a quick wash and staying cool on the go. Check it out in action!

 Yes! The Sport is BPA free, and the bottle itself is made of stainless steel.  

The Sport's shower setting will give you about 3:00 minutes of continuous spray time as long as you are constantly pumping pressure into the bottle. The mist setting sprays for approximately 8:00 minutes.

The Sport is not dishwasher safe. To maintain the integrity of the insulation layer in your bottle and to avoid damaging the lid’s internal parts, we do not recommend putting the Sport in the dishwasher. Additionally, the Sport is not microwave safe. However, the Sport is insulated and will keep liquids hot or cold for hours!  

We recommend using soap and water to keep your Sport clean. Be sure to wash the bottle and internal pump before you use it for the first time! 

If you have used the Sport with any liquid other than water, we recommend cleaning the Sport with white vinegar and water. 

To clean the Sport’s internal lid parts, fill the bottle with about ¼ cup of white vinegar, use the pump to add pressure, and then alternate pressing the spray and mist buttons to run the vinegar through the sprayers. Once the vinegar has run through, rinse the bottle, add in an additional ¼ cup of clean water, use the pump to add pressure, and alternate pressing the spray and mist buttons to run the clean water through the sprayers. Now your Sport is clean and ready to go!  

Yes! Enjoy ice cold soda, your favorite sports drink or even a beer if you’re feeling the heat on hot summer days! Avoid liquids with small particles such as tea leaves, coffee grounds or protein powder as they may cause the sprayers to get clogged.   

Yes, the Sport is insulated! It will keep liquids hot or cold for hours.   

No. Leaving the Sport in freezing conditions below 32 degrees Fahrenheit could damage the lid’s internal parts.  

The Sport lid is compatible with Hydro Flask (32 oz lid or larger capacity) Wide Mouth bottles and comparable bottles with a 2.26” diameter opening.  

Simply unscrew the lid and drink from the top! Or if you’re feeling adventurous, spritz it directly into your mouth with the spray setting!  

768 ML | 26OZ (with 2” gap for air pressure) 

946 ML | 32 OZ (with no gap for air pressure)  

No. However, you may need to continue to pump in more pressure into the bottle as the liquid inside depletes.  

When the Sport is not in use, we recommend releasing the pressure inside by opening the lid. Leaving the unit pressurized and putting it into a backpack or purse may cause the bottle to slowly release its pressure and may result in leaks.  

Yes, ice will not affect the internal parts of the Sport.   

Yes, the Sport is covered under a Limited One Year Warranty. To learn more about our
warranties,
click here.    

Cosmetic Misprint RinseKit Plus Portable Shower+ Pressure Booster Pump

Cosmetic Misprint refers to units that didn’t quite meet to our high standards, but only cosmetically. Cosmetic misprinted items have all the parts and accessories that would have been included with the original product, however the outside of the units have a few additional, noticeable scratches and printing flaws. 

The Cosmetic Misprint Plus accessories include the Hot Water Sink Adapter, Hose Bib Adapter, Spray Nozzle and Pressure Booster Pump. 

The Cosmetic Misprint units are in limited supply, and we cannot guarantee quantities. These units are purely on a first come, first served basis. Product supply is updated as units become available.  

Yes! The Cosmetic Misprint Plus units still can qualify for our Limited One Year Warranty However, they are NOT eligible for return. 

The Cosmetic Misprint units are non-returnable and coupon code are not applicable. 

Cosmetic Misprint RinseKit Pod Portable Shower

Cosmetic Misprint refers to units that didn’t quite meet to our high standards, but only cosmetically. Cosmetic misprinted items have all the parts and accessories that would have been included with the original product, however the outside of the units have a few additional, noticeable scratches and deep divets. 

The Cosmetic Misprint Pod accessories include the Hose Bib Adapter, Hot Water Sink Adapter and Spray Nozzle. 

The Cosmetic Misprint units are in limited supply, and we cannot guarantee quantities. These units are purely on a first come, first served basis. Product supply is updated as units become available.  

Yes! The Cosmetic Misprint Plus units still can qualify for our Limited One Year Warranty However, they are NOT el igible for return. 

The Cosmetic Misprint units are non-returnable and coupon code are not applicable. 

Hot Rod Water Heater for Plus and Pod

The Hot Rod Water Heater quickly and safely heats the water in your Classic RinseKit Plus or Pod to a comfortable shower temperature. Now you can have a hot shower anywhere! (Also compatible with the Lux and Original Black RinseKit models)

The Plus and Pod models can be filled with hot water from your sink using our Hot Water Sink Adapter and our Hot Rod Water Heater will continue to heat the water as you’re on your way to your next big adventure! The heater will heat the Plus 11 degrees Fahrenheit every 30 minute interval and the Pod heats 13 degrees Fahrenheit every 30 minute interval.

The Hot Rod Water Heater is made of stainless steel, so it is rust free and easy to clean! 

Yes, the Heater is compatible with our Classic Plus and Pod models as well as our previous Lux and Original Black RinseKit models. 

It is NOT compatible with the RinseKit PRO.

1) Open the lid of your RinseKit and unscrew the drain plug by turning it counter-clockwise.

2) Turn your RinseKit upside down and drain all of the water out.

3) Turn your RinseKit right side up and using your hands only, screw the heating rod into the drain port by turning it clockwise. Be very careful not to cross thread the metal threads of the heater with the plastic threads of the tank. It’s helpful to push the top of the heating probe straight down into the threads and slowly turn the probe clockwise until the threads engage. Hold the timer and cord with your other hand to allow it to spin as you screw the heater into the RinseKit tank. If the heater is difficult to turn, then you’ve cross threaded it. Do not force it. Back out the heater by turning it counter clockwise and try again.

4) Once you have the heater probe hand tight, then use the wrench provided (27mm) to snug it firmly.

5) Fill your RinseKit as you normally would. If you have not filled it before, please refer to the instructions inside the lid of your RinseKit or watch a video on how to fill your RinseKit in this FAQ section. We recommend that you completely fill your RinseKit before using the heater. This will ensure that the heating probe is completely submerged. Turning the heater on while the RinseKit is empty could cause the heater to overheat and damage it. Once the heater is inserted into the drain port, it is ok to leave the heater permanently installed in the RinseKit. 

1) Once the heater probe is installed and the RinseKit is filled, load the RinseKit in your vehicle in a secure place where it will not tip over or hit you in the case of an accident.

2) Plug the timer into the 12v power socket (cigarette lighter) of your vehicle and set the timer to either 30 minutes, 60 minutes or 90 minutes.

a. Press the silver button one time on the timer and the water will heat for 30 minutes.

b. Press the silver button twice and the water will heat for 60 minutes.

c. Press the silver button three times and the timer will heat for 90 minutes.

If you press the silver button 4 times it will reset to off.

The specific time light (30, 60 or 90 mins) will blink when the heater has been activated. The heater will then begin heating within 2 seconds after the time has been selected.

When the timer reaches the last 5 minutes of heating, the 5 min light will blink.

Note: For every 30 minutes of time, the water water will heater approximately 11 degrees Fahrenheit.

NOTE: Vehicle power to the 12v power socket (cigarette lighter) on some vehicles shuts off when the ignition key is turned off. To test your vehicle, watch to see if the LED light shuts off when you turn off your ignition key. If the light goes out, the heater will not activate as there is no power. If the 12v power socket (cigarette lighter) in your car stays on when your key is turned off, then the heater will continue to heat while your car is parked. If your car has a weak battery, we do not recommend leaving the heater turned on for more than one hour.  

1) The car key is turned off and your particular car might require the key to be turned on to 'accessory mode' or the car may need to be running to provide power to the socket. Some auto manufacturers allow the socket to be powered with the key off or even out of the car and some need the key to be switched on.

2) Plug in another device like a phone charger to see if it lights up or powers up your device. If it does not, and the car key is on, then you may have a blown fuse. Consult your owners manual to find the fuse box and the specific fuse to the accessory socket and inspect it to see if it is broken. The heater draws 9 amps and most car accessory port fuses are 10 amp fuses, so the heater is designed to not blow the fuse. If it is broken, then replace it. If the new fuse does not fix the problem, then you may have a loose or damaged wire. Time to see a mechanic!

3) The heater got damaged in shipping. If this is the case, please try the heater in another vehicle that you know has a working accessory socket. If it still doesn’t work, please contact us and we will replace your heater with a new one if it is still within the year. 

Yes, anything that gets hot could be potentially dangerous. Here are our WARNINGS:

• Water temperature over 125 degrees Fahrenheit can cause severe burns instantly

• Feel water before rinsing or showering

• Children and elderly are at highest risk of being scalded

Do not cycle the timer for more than 90 minutes 

Pressure Booster Pump for Plus and Pod

1. Remove the drain plug from your RinseKit by turning it in a counterclockwise direction. 

2. Place the Pressure Booster Pump into the drain port and hand tighten it by turning it in a clockwise direction. Please be careful to not cross thread! If the pump is difficult to turn, then you’ve cross threaded it. Do not force it. Back out the pump by turning it counter clockwise and try again.

3. Once the pump is firmly secure, you are ready to use your RinseKit. 

If you don't have access to a hose bib or sink and want to pressurized your RinseKit remotely, follow these directions:

1. Unscrew the drain plug from your RinseKit and pour water into the tank.

2. When the RinseKit is 95% full, install the Pressure Booster Pump by placing it in the drain port and turning it in a clockwise direction.

3. When the pump is securely installed, use your hand to pump pressure into the unit. Make sure to look at the pressure gauge located on the top of the pump to ensure that you are pressurizing your RinseKit to the recommended 65 PSI.
 

If you have access to a hose bib or have access to a sink and own our Hot Water Sink Adapter accessory, you do not need the pump to pressurize your RinseKit.

The Pressure Booster Pump allows you to pressurize your RinseKit when you do not have access to a hose bib or sink. It is also great for adding additional pressure to your RinseKit if you have low water pressure or want to get the maximum spray time from your unit. Users who add additional pressure into their RinseKit after normal filling, get approximately 25% more spray time! 

The pump will only read the PSI inside tank when the pump is in motion, not when it only sits in the tank. 

Hot Water Sink Adapter for Plus and Pod

Now you can fill your RinseKit with hot or cold water! Or, if you do not have access to a hose spigot, you can fill from your sink! Simply screw this adapter to your sink faucet and quickly fill your RinseKit with hot, cold, or warm water. 

The Hot Water Sink Adapter is included with every Plus and Pod. The Hot Water Sink Adapter can additionally be purchased here

The Hot Water Sink Adapter is designed to fit most standard sinks and comes with both male and female threading. If you have a specialized faucet, the Hot Water Sink Adapter will likely not fit.  

Hose Bib Adapter (2-Pack) for Plus and Pod

Yes, if you are located in the United States. Our Hose Bib Adapter is not compatible with spigots in Australia and Japan. 

Yes, the Plus and Pod both come with a Hose Bib Adapter.  

Spray Nozzle

No! The Spray Nozzle is included with all of our RinseKits!  

Our Spray Nozzle head has a male Quick Connect adapter attached. It also offers 5 spray settings: Shower, Center, Flat, Mist, and Jet.

Yes! Every spray nozzle includes a small metal notch behind the shower head that can be used as a sort of kickstand to keep the nozzle spraying so you can use your RinseKit with both hands free. 

Microfiber Towel / Seat Cover

RinseKit’s clever take on the towel includes a reinforced headrest opening that allows the towel to be secured on your car seat. Check it out! 

Yes, the towel is machine washable. 

The super absorbent microfiber towel is 30"x 62". When rolled or folded, it is small enough to fit in the top tray of the Plus. 

Gift Card

Gift Cards are delivered by email and contain instructions to redeem them at checkout. 

No! Spend your card right away or save it for when the time is right.